+495273 9050

Compact Loader

Its compact design, low overall depth and the cycle-optimised access it offers to the compartments of the integrated compact warehouse make the fully automatic Compact Loader the ideal solution for cramped storage areas and low halls. When it is combined with one or even more additional compact warehouses, the storage volume and the variety of types can be expanded and thus adapted to suit almost any requirement. The Compact Loader is designed as a stand-alone full gantry that can be used under almost any spatial conditions and reliably supplies up to two cutting lines with glass.

HEGLA Cmpact Loader

Features

  • Fully automatic glass loading for up to two cutting lines
  • Space-saving thanks to low overall depth and compact design
  • Perfect for cramped storage areas and low halls
  • Designed for a wide variety of types and larger storage volumes
  • Maintains glass quality and high level of safety thanks to HEGLA's established peeling technology, which separates the panes from the bottom of the stack slightly before lifting
  • Glass is always fed through, i.e. the suction frame dips into the loading table and set the glass down with the coated side facing upwards
  • Inclination and stroke of suction frame set automatically
  • Fully networkable and automatable with HEGLA cutting systems and automatic compact warehouses
  • Can be integrated in and adapted to suit many cutting systems

Functional description

When requested by the cutting system, the production control system or a manual command from the operator, a gap is opened between the moving, closely spaced compartments of the compact warehouse. The Compact Loader and its suction cup frame move into the warehouse. The suction cups latch onto the pane and, using HEGLA’s established peeling technique for surface protection and safe glass removal, separate it slightly from the underside of the subsequent sheets. The pane is then lifted, transported through the compact warehouse and, timed to precise cycles, transferred to a tilting support table with a connection to the cutting system. The glass transfer always uses a “combing” principle, i.e. the suction cup frame is lowered into the support table and sets the glass down with the coated side facing upwards.

With an optional rotating suction cup frame, the glass sheet can also be removed from A/L racks or a Rapidstore.

Cem Kara Hegla Türkei Ansprechpartner
Cem Kara


Please contact me

Do you have any questions or require further information on this subject?

+90 (216) 577 0603 +90 (533) 749 1458 cem@ikatek.com.tr
Kontakt France
Daniel Kolopp


Please contact me

Do you have any questions or require further information on this subject?

+ 33 (0) 3 88 / 91 01 01 daniel.kolopp@heglafrance.com
Contact Donatas Jakutis Litauen
Donatas Jakutis


Please contact me

Do you have any questions or require further information on this subject?

+370 650 11376 donatas.jakutis@glastech.lt
Contact Fabio Zucal Italy
Doreen Zucal


Please contact me

Do you have any questions or require further information on this subject?

+ 39 334 59 56 212 zucal.hegla@vodafone.it
Contact Eero Jalkanen
Eero Jalkanen


Please contact me

Do you have any questions or require further information on this subject?

+03 58 44 21 00 76 7 eero.jalkanen@treglas.com
Contact Fabio Zucal Italy
Fabio Zucal


Please contact me

Do you have any questions or require further information on this subject?

+ 39 334 59 56 212 zucal.hegla@vodafone.it
Contact Ghassan Nassar Egypt
Ghassan Nassar


Please contact me

Do you have any questions or require further information on this subject?

+20 10 66 85 29 62 +20 100 10 8 22 55 polychem.egypt@tedata.net.eg
Kontakt Greg Smith England
Greg Smith


Please contact me

Do you have any questions or require further information on this subject?

+ 44 330 124 5759 greg.smith@hegla.co.uk
Kontakt USA
HEGLA Corp.


Please contact me

Do you have any questions or require further information on this subject?

+1 404 763 9700 info@heglaus.com
Contact Naomichi Haizuka Japan
Kenji Usami


Please contact me

Do you have any questions or require further information on this subject?

+81 (0)3 5114 0852 kenji.usami@correns.co.jp
Kwan Hoong Mak - HEGLA-TaiFin
Kwan Hoong Mak


Please contact me

Do you have any questions or require further information on this subject?

+65 9627 4676 kh.mak@hegla.de
Contact Marat Z. Khoussainov Russia
Marat Z. Khoussainov


Please contact me

Do you have any questions or require further information on this subject?

+ 7 977 714 99 13 marat.khusainov@hegla.de
Representative Marcel Dagher MENA
Marcel Dagher


Please contact me

Do you have any questions or require further information on this subject?

+971505200516 marcel.dagher@hegla.de
Hegla Partnet Indien Naresh Kumar
Naresh Kumar


Please contact me

Do you have any questions or require further information on this subject?

+91 (0) 80 56 13 31 13 naresh.kumar@hegla.in
Kontakt Qin Wang China
Qin Wang


Please contact me

Do you have any questions or require further information on this subject?

+86 138 5712 4185 qin.wang@dtmthz.cn
Reinhold Gelbenegger - Contacts HEGLA
Reinhold Gelbenegger


Please contact me

Do you have any questions or require further information on this subject?

+49 (0) 5273 / 905-232 reinhold.gelbenegger@hegla.de
Hegla Spanien Ansprechpartner Rolf Meyer
Rolf Meyer


Please contact me

Do you have any questions or require further information on this subject?

+34 93 30 10 52 5 rolf.meyer@rmeyersl.com
Toni Georgievski HEGLA
Toni Georgievski


Please contact me

Do you have any questions or require further information on this subject?

+49 (0) 5273 / 905-411 toni.georgievski@hegla.de
Technical data
Maximum cut length

Maximum glass dimensions

CL 3828:
3,810 mm * 2,750 mm

CL 6133:
6,000 mm * 3,210 mm

Cutting speed

Maximum longitudinal travel speed

60 m/min

Load capacity

Load capacity

CL 3828:
600 kg

CL 6133:
600 kg (optionally 900 kg)

Do you have any questions? Maybe you’re looking for a bespoke system?

We would love to advise you and help you with your project

Get in touch
Downloads
Brochure Loading and Storage

Configurable options

Rotating suction frameRotating suction frame
Compact loader- GraphicCustom storage capacities
Storing and sortingStoring and sorting
Storage managementStorage management software
HEGLA-Hanic CockpitHEGLA-HANIC Cockpit
Remote maintenance - HEGLA Maintenance and ServiceRemote maintenance
Rotating suction frame

Compact loader- Graphic
Storing and sorting
Storage management
HEGLA-Hanic Cockpit
Remote maintenance - HEGLA Maintenance and Service

Top-quality consulting,
planning and implementation

There’s nothing that can’t be improved. Our staff are always striving to become better and ensure “quality in everything we do”. We see ourselves as a provider of quality products. Experienced engineers, technicians and specialists guarantee consistently high quality standards. Computer-aided production planning and management, efficient materials management, economic production processes and close collaboration with qualified suppliers are the pillars of our production company. The DIN EN ISO 9001:2015 certification (initial certification: Dec. 95) for our headquarters in Beverungen, western Germany, gives our customers the assurance they need that we can provide top-quality products and have a well thought-out organisational structure.

  • We offer solutions for every part of the glassworking process
  • We treat our customers as partners
  • Development of custom solutions to suit your individual needs
  • We believe in Industry 4.0 and provide custom software solutions
Get consultation
Insights
Schlanke Bauweise des Compact Loaders
Compact Loader Lagersystem Verbindung
HEGLA Compact Loader Front-Ansicht
Verbindung zum Rohglaslager mit HEGLA Compact Loader
Auf Bodenschienen geführter Compact Loader
Verbindung mit L-Gestellen oder querverfahrbaren Lagersystemen