Composite line consisting of ProLam and AdvaLam
The fully networked AdvaLam and ProLam composite line brings together two high-performance cutting systems for LSG. The two systems feature first-class cutting quality, precision, high productivity, and automation. The composite line allows them to demonstrate their strengths as a high-volume, industrial, automated cutting solution.
Networked, high-performance cutting for laminated glass
The upstream AdvaLam with fully automated workflows functions in fast cycles without an operator. First, the raw glass is decoated and given a laser marking, for example. Next, the X-sheets are automatically cut by the AdvaLam and the system transports them to the ProLam. The ProLam carries out the downstream Y and Z-cuts of the laminated glass in quick succession. For even higher cutting performance, the AdvaLam can be equipped with the optional X/Y mode. The fully automated cutting system takes on the cutting tasks from the ProLam, thus increasing the throughput for cutting safety glass.
Features
- Integrated composite of two automated cutting systems for laminated glass (positioning, cutting, breaking, separating)
- Automatic glass transport and optional decoating, laser marking, and positioning
- Short cutting cycles thanks to process-oriented procedures
- Software and waste-optimised cutting process
- Dual cutting heads achieve perfectly aligned and dimensionally accurate cuts
- LSG film is separated cleanly in the cutting area
- Optionally adaptable to any customer requirements thanks to wide range of additional functions
Functional description
The glass is transported into the AdvaLam, edge-decoated, and given a laser marking if required. The X-sheet cutting process is fully automated. Depending on how the line is configured, the AdvaLam can also take on the Y-cuts of the ProLam in X/Y mode in order to increase throughput. The system automatically transports the laminated glass to the ProLam, either via a straight-line layout with a rotating beam, or using a corner combination. On the ProLam, the remaining Y and Z-cuts are carried out using partially automated processes and, in some cases, with the aid of an operator to ensure fast cycles.
Do you have any questions or require further information on this subject?
+90 216 5 77 06 03 +90 533 7 49 14 58 cem(at)ikatek.com.tr
Do you have any questions or require further information on this subject?
+33 3 88 / 91 01 01 daniel.kolopp(at)heglafrance.com
Do you have any questions or require further information on this subject?
+370 650 1 13 76 donatas.jakutis(at)glastech.lt
Do you have any questions or require further information on this subject?
+358 4 42 10 07 67 eero.jalkanen(at)treglas.com
Do you have any questions or require further information on this subject?
+39 334 59 56 212 italy(at)hegla.com
Do you have any questions or require further information on this subject?
+20 10 66 85 29 62 +20 10 01 08 22 55 ghassannassar1965(at)gmail.com
Do you have any questions or require further information on this subject?
+51 14 77 05 28 info(at)glasstek.org
Do you have any questions or require further information on this subject?
+44 3 30 12 45 79 greg.smith(at)hegla.co.uk
Do you have any questions or require further information on this subject?
+81 3 51 14 08 52 kenji.usami(at)correns.co.jp
Do you have any questions or require further information on this subject?
+ 7 977 714 99 13 hegla.russia(at)yahoo.com
Do you have any questions or require further information on this subject?
+971 5 05 20 05 16 marcel.dagher(at)hegla.de
Do you have any questions or require further information on this subject?
+48 882 77 25 05 michal.siergiejewicz(at)hegla.de
Do you have any questions or require further information on this subject?
+91 80 56 13 31 13 naresh.kumar(at)hegla.in
Do you have any questions or require further information on this subject?
+86 1 38 57 12 41 85 qin.wang(at)dtmthz.cn
Do you have any questions or require further information on this subject?
+34 93 3 01 05 25 rolf.meyer(at)rmeyersl.com
Do you have any questions or require further information on this subject?
+49 52 73 905 232 reinhold.gelbenegger(at)hegla.deTechnical data
Film thickness
0.38 to 3.8 mm
Maximum cut length
3,700 mm and 4,600 mm
Cutting speed
120 m/min
Cutting accuracy
± 0.5 mm
Maximum cut height
2 x 3 mm to 2 x 8 (10) mm
We are happy to offer our advice and assistance
Contact usConfigurable options
Edge decoater
Film peeling system
Rotating beam
Residual strip removal
Glass thickness 2x12 mm
Labelprinter
EsGuard laser marking system
Remote maintenance
Insights
